T 937-322-2272
sales@tinkeromega.com
Serving the Equipment Needs of the No-Bake Foundry Industry Worldwide
T 937-322-2272
sales@tinkeromega.com
Serving the Equipment Needs of the No-Bake Foundry Industry Worldwide
SH-Series features state-of-the-art, fully proportional SCR control systems for efficient, accurate sand temperature control in throughputs ranging from 100 to 2,000 lbs/min.
Each unit is sized based on temperature rise and throughput rate. Each unit features a summer by-pass that eliminates the use of compressed air during non-heating periods.
BENEFITS
SPECIFICATION
| Dimensions | ||||||||
| Model | A | B | C | D | E | Inlet (Diameter) |
kW | Extraction |
| 22-480 | 34.5" |
38.8" | 19" | 17" | 34.6" | 4" | 22.5 | 50 cfm |
| 876mm | 985mm | 482mm | 431mm | 878mm | 85 m3/hr | |||
| 45-480 | 34.5" | 66.8" | 19" | 17" | 56.8" | 45 | 60 cfm | |
| 876mm | 1696mm | 482mm | 431mm | 1442mm | 102 m3/hr | |||
| 60-480 | 34.5" | 66.8" | 18" | 24" | 67.8" | 6" | 60 | 90 cfm |
| 876mm | 1696mm | 457mm | 610mm | 1722mm | 152 m3/hr | |||
| 90-480 | 37.6" | 66.8" | 23" | 22" | 67.6" | 90 | 180 cfm | |
| 955mm | 1696mm | 584mm | 558mm | 1717mm | 305 m3/hr | |||
| 120-480 | 36.5" | 66.8" | 31.1" | 34" | 71.8" | 8" | 120 | 245 cfm |
| 927mm | 1696mm | 790mm | 863mm | 1823mm | 416 m3/hr | |||
| 150-480 | 45.1" | 71.8" | 33" | 31.1" | 76" | 150 | 290 cfm | |
| 1145mm | 1823mm | 838mm | 790mm | 1930mm | 493 m3/hr | |||
| 300-480 | 36" | 65.8" | 42.5" | 39.5" | 86.3" | 300 | 400 cfm | |
| 914mm | 1671mm | 1079mm | 1003mm | 2192mm | 680 m3/hr | |||
| Capacities | |||||||||
| lb/min | 100 | 200 | 300 | 400 | 550 | 750 | 1000 | 1600 | 2200 |
| mtph | 3 | 5.4 | 8 | 11 | 15 | 20.4 | 27 | 43.5 | 60 |
| Temperature Rise - F° | |||||||||
| 22.5 kW | 55 | 30 | 9.8 | ||||||
| 45 kW | 75 | 60 | 35 | 25 | 9 | ||||
| 60 kW | 85 | 55 | 35 | 25 | 5 | ||||
| 90 kW | 70 | 45 | 30 | 15 | 5 | ||||
| 120 kW | 70 | 55 | 30 | 15 | 5 | ||||
| 150 kW | 70 | 55 | 30 | 15 | 5 | ||||
| 225 kW | 70 | 48 | 30 | 15 | |||||
| 300 kW | 70 | 55 | 30 | ||||||
Sand Heater Specification
SH-Series Sand Heater
Low-profile model has half the body height (available up to 90-kW)
Elements are removed from the bottom of the heater for ease of service. Change one – or all.
Fully Proportional SCR control for maximum energy savings and accuracy
Easy access to fluidizing membrane for service