T 937-322-2272
sales@tinkeromega.com
Serving the Equipment Needs of the No-Bake Foundry Industry Worldwide
T 937-322-2272
sales@tinkeromega.com
Serving the Equipment Needs of the No-Bake Foundry Industry Worldwide
Sand Conveying Pressure Vessels
SPECIFICATION
| Pneumatic Sand Conveying | ||||
| Model | A | B | C | D |
| PV-1* | 18" 450mm |
17" 440mm |
25" 640mm |
23" 590mm |
| PV-3 | 36" 912mm |
24" 610mm |
34" 876mm |
37" 949mm |
| PV-6 | 39" 996mm |
42" 1067mm |
||
| PV-9 | 47" 1182mm |
50" 1274mm |
||
| PV-12 | 41" 1050mm |
30" 756mm |
49" 1256mm |
52" 1322mm |
| PV-15 | 55" 1401mm |
57" 1458mm |
||
| PV-20 | 62" 1585mm |
65" 1639mm |
||
| PV-30 | 72" 1829mm |
75" 1905mm |
||
*Control panel is remote mounted
| Pneumatic Sand Conveying | ||||||||||||
| Model | Pipe Bore |
Throughput* @ 325 ft (100m) |
Typical Air Consumption @ 58 psi (4.0 BAR) | |||||||||
| 100 ft (30m) | 150 ft (50m) | 250 ft (75m) | 300 ft (100m) | |||||||||
| lb/min | tph | SCfm | Nm³/min | SCfm | Nm³/min | SCfm | Nm³/min | SCfm | Nm³/min | |||
| PV-1* | 2" | 50mm | 70.0 | 2.1 | 25 | 0.7 | 31 | 0.9 | 39 | 1.1 | 42 | 1.2 |
| PV-3 | 3" | 80mm | 136.7 | 4.1 | 45 | 1.3 | 58 | 1.7 | 75 | 2.1 | 82 | 2.3 |
| PV-6 | 4" | 100mm | 200.0 | 6.0 | 59 | 1.7 | 79 | 2.3 | 108 | 3.1 | 119 | 3.4 |
| PV-9 | 5" | 125mm | 320.0 | 9.6 | 96 | 2.7 | 128 | 3.6 | 174 | 4.9 | 192 | 5.4 |
| PV-12 | 6" | 150mm | 456.7 | 13.7 | 136 | 3.9 | 182 | 5.2 | 251 | 7.1 | 273 | 7.7 |
| PV-15 | 473.3 | 14.2 | 143 | 4.1 | 191 | 5.4 | 259 | 7.3 | 284 | 8.1 | ||
| PV-20 | 486.7 | 14.6 | 149 | 4.2 | 197 | 5.6 | 266 | 7.5 | 291 | 8.3 | ||
| PV-30 | 8" | 200mm | 1336.7 | 40.1 | 590 | 16.7 | 681 | 19.3 | 775 | 22.0 | 802 | 22.8 |
*Based on sand density of 90 lb/ft3 (1450 kg/m3) based on 6 bends
Dual sand inlet with calibration gate